Minelab Gold Monster 1000 Metal Detector and Pro-Find 35 Pinpointer - 3317-0005-pf35
Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets. When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximize your gold recovery! Â
GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors! Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
What Our Experts Think
-
Optimized gold sensitivity: Detects both small and large nuggets with minimal compromise.
-
Pro-Find 35 pinpointer included: Speeds up target recovery and reduces unnecessary digging.
-
High-frequency performance: Excels in detecting sub-gram and small gold nuggets.
-
All-terrain capability: Performs well on mineralized soils and gold-rich areas.
-
Efficient nugget recovery: Designed to maximize small gold finds at greater depths.
Q&A
Q: How does the Gold Monster 1000 handle small gold?
A: High-frequency design improves sensitivity to small nuggets, even in difficult ground.
Q: What does the Pro-Find 35 add?
A: Quickly and accurately pinpoints targets for faster recovery.
Q: Can it detect larger nuggets effectively?
A: Yes—sensitivity is optimized for both small and large gold.
Q: Is it suitable for mineralized soils?
A: Yes—performs reliably in noisy or gold-rich environments.
Q: Is this detector beginner-friendly?
A: Yes—automatic ground tracking and intuitive controls make it easy to use.
Maintenance Tips
-
Rinse coils and detector after use in dusty, muddy, or wet conditions.
-
Check battery regularly to maintain performance.
-
Inspect cables and connectors before each hunt.
-
Store in a cool, dry location to protect electronics.
-
Keep pinpointer clean and dry for optimal operation.
